Repair procedures

Removal

1. Remove the pressure hose from the oil pump and the suction hose from the suction pipe, then drain the power steering oil.




2. Release the tension of the power steering V-type belt by lifting the auto-tensioner pulley.




3. Remove the V-type belt from the pulley of the power steering oil pump.




4. Remove the power steering oil pump assembly by removing the three bolts as shown below.






Installation

1. Install the oil pump to the oil pump bracket.




2. Install the "V"-type belt by pulling the auto tensioner.
3. Install the suction hose.

CAUTION:
Install the pressure hose to the oil pump.

4. Install the pressure hose to the oil pump.

NOTE:
Install the pressure hose being careful so that it does not twist and come in contact with other components.




5. Add power steering fluid (PSF-4).
6. Air bleed the system.
7. Check the oil pump pressure.